Untreated Diamond Pro Airway Buff 10" Class 4 16ply 3/8" CS

Untreated Diamond Pro Airway Buff 10" Class 4 16ply 3/8" CS

10" diameter 3" center 16ply edge cut Airway style buff. Excellent choice for diamond plate, step grate, and other narrow or recessed areas. Soft untreated buff for cut buffing. Heavy duty class 4 construction. Sewn at a 3/8" concentric stitch. High density cloth. Buff will need to be raked prior to initial use. Does not include a center reducer plate. Requires the use of a Quickcenter safety flange set or standard 4.5" end flanges in conjunction with a center reducer plate for proper mounting and safe operation. Industrial grade.

$14.00 Each

This item is out of stock and cannot be purchased at this time, please check back again later.

Untreated Airway Buff
Airway Wheels

Additional Information

Product Type Untreated Airway Buff
SKU B264006
Average Weight 1.0 lbs
Outside Diameter 10"
Inside Diameter 3"
Primary Material Cotton
Cloth Density 86/80
Ply 16
Class 4
Max Face Width 1/4"
Center Hole 3"
Center Reducer Plate Sold Separately
Treatment Untreated
Treatment Properties Untreated
Purpose Color Buffing
Max RPM 3400
Minimum Order 1
Availabilty Stock and Drop Ship Item
Case Quantity 10* / 50 / 100 / 500
Non-Defect Return With RMA - See Policy
Ships From MT, IL
Ships Via UPS, USPS, FedEx, LTL
Warranty Yes
Additional Info No

Description: Bias type Airway buff.

Typical Application: For cut down and finishing. Provides a faster cut and is firmer than untreated cloth. Treatment creates a very firm buff, best suited for cut buffing in higher densities. Can also be used as a color buff in low densities. Generally selected for heavy work requiring a firm buff that will still flex slightly on uneven surfaces. Recommended for use with Tripoli compound for cut buffing and green chrome rouge for color buffing. For optimal performance, buff face will need to be raked initially and as any glazing appears.

Airway buffs feature a pleated design that allows for cooler operation than full disc untreated buffs, they also provide some oscillation on the face to help prevent rippling and streaking. These are edge cut buffs which means the compound is loaded and all the work is performed on the outer edge only. Airway buffs are similar to loose buffs wherein they will lap considerably under pressure, use extreme caution when using near sharp edges. Cleaning is accomplished through raking or spurring only, do not wash.

Class 2 for general purpose and Class 4 for heavy duty. Made of 86/80 cotton cloth for most standard purposes. Note: The class or pack refers to the length of cloth strips wound into the center clinch ring. A higher class number has longer strips which produces more pleats and a firmer, longer wearing buffing wheel.

8" to 24" in diameter depending on job requirements. 16 ply is standard; also available in 12, 14, 18, or 20 ply to accomplish more or less flexibility. Centers are 3", 5", 7" or 9", and should be in a compatible relation with the outside diameter of the buff.

Safe operation requires the use of end flanges. Wear appropriate safety clothing, respiratory, and eye protection during use. Do not exceed maximum specified RPM.

Industrial grade. Guaranteed for quality and performance.

All related media files will be listed here when available.

Product Questions

No Questions

3 Item(s)

3 Review(s)
Darren D Moody
June 24, 2018
Narrow Buff
Great color buff for steps and diamond plate. Well built, long life.
Stephane Gauthier
May 21, 2018
All these diamond pro wheels work great, specially love that white one to finish, cleans up all diamond perfect leaving a high shine. I'm using it with white Kocour KC11 or white Matchless HF1