Menzerna 439T Heavy Cut Compound
| Price | |
|---|---|
| Value | |
| Quality |
3 Review(s)
Stephen Miller
February 18, 2021
Surprised
My background: A knife maker who needs a clean and consistent mirror polish without fail. I’ve tried many different suppliers and bar compounds. This Menzerna bar beats them all as an initial cut down compound. Will be ordering more. Thanks again Infinish.
Buddy Y
February 15, 2021
Great cutting bar
I switched to this bar to use as my primary cut on aluminum and stainless about 1.5 years ago. Great bar for cuting out down to 320 grit sanding. A littke goes a long way. Pairs very well with a violet or orange quick cut wheel. Leaves a better shine with one cut then other bars leave with multiple stages.
Ryan D
February 11, 2021
Lasts forever, cuts fast, incredible finish
This bar will outlast most primary cutting bars by 3 to 4x their expectancy. As most say a little goes a long way! Its cutting ability is superior and the lubrication agent that's in it significantly reduces the possibility of burning aluminum
Brendon Campbell
February 8, 2021
Great Bar
Best bar in the game. Takes a bit to get used to how greasy it is but once you do this bar is by far the best. Long lasting great quality.
MVP
February 8, 2021
Highly recommend
An extremely greasy bar but has awesome cutting power with a great shine as well. You need very little compound to make this work. Do not try loading your buffing wheel up as what you would with any other compound. You’ll only need a quarter of what you regularly use.
Kris Ram
February 8, 2021
The King of Compounds
I have seen many polish jobs in my time and no matter who is doing the work, it will never come out as good unless you use Menzerna. Tried and true! When the product speaks for itself, you don’t need mass marketing on social media! #MenzernaProud
Chris
February 8, 2021
Absurdly long-lasting and cuts clean.
This bar cuts harder than tripoli (will take out as deep as 280 grit sanding marks) but unlike many other producers' compounds doesn't require wipe-downs between steps. Word of advice: apply MUCH less compound than you would with a tripoli - overloading will overlubricate your buff. A little goes a long way.
Dennis
February 8, 2021
Best compound for cutting
By far the best compound I have used. You don't need much and it goes a long way. With the best results for a cutting compound.