Flash Pre-Cut Liquid Metal Polish (16 oz.)

New Flash Pre-Cut Liquid Metal Polish (16 oz.)

Liquid metal polish for oxidation and fine scratch removal on pre-polished metals. Flash Pre-Cut liquid metal polish is an initial cut and surface preparation polish. Recommended for use with terry cloth to remove fine scratches and oxidation. Flash metal polishes are professional grade. They're formulated using only top quality polishing agents at high concentrations to provide maximum performance and exceptional results. Primarily for hand application but can be successfully applied with low speed and orbital buffers as well. 100% satisfaction guaranteed for performance and results. 16 ounce container and 12 bottles to a case.
$24.00 Per Pint

In Stock

For a limited time get a 300 GSM Microfiber towel and applicator with every retail bottle. (Cases and wholesale excluded)
Type:
Liquid Metal Polish
Category:
Flash Metal Polishes
Details

Additional Information

SKU F169003
UPC 853302002032
Average Weight 1.40 lbs.
Purpose Oxidation and fine scratch removal from smooth metals
Case Quantity 12
Item Dimensions N/A
Yield 16 oz.
Availabilty Stock and Drop Ship Item
Minimum Order 1
Hazmat Item No
MSDS (SDS) Available
Max Storage N/A
Warranty Yes
Non-Defect Return With RMA - See Policy
Ships From MT
Ships Via UPS, USPS, FedEx, LTL
Product Type Liquid Metal Polish
Additional Info For optimum performance shake product for 60 seconds before use.
About

Description: Liquid Metal Polish

About:
  Flash Pre-Cut is the most aggressive and is recommended as an initial step to remove fine scratches and oxidation from affected metals. It will produce a mirror-like finish although not as reflective or clear as the Flash Green or Billet. Terry cloth is recommended for application to help prevent caking and enhance the aggressive nature of the product. It does not contain an oxidation inhibitor or protectant, subsequently the finish achieved with this product will degrade quicker than if followed up with Flash Green or Flash Billet. For best results Pre-Cut should be allowed to dry before attempting to remove. Important: Product is completely blended when uniform color is achieved at the base of the bottle. Failure to accomplish this during initial mixing will result in a thinner and less aggressive polish, substandard performance, and prevent full usage of bottle contents.

Precautions: Keep away from heat, sparks, and open flame. Use in well ventilated areas. Avoid prolonged breathing of vapors. Avoid eye contact and prolonged skin contact. Keep container closed when not in use.

Note:
These products are intended only for use on metal and are not recommended for painted surfaces.

Media
All related media files will be listed here when available.
Q&A

Product Questions

No Questions
Reviews
0 Review(s)
Locations

Flash Metal Polish is also available for purchase at the following locations:


Alloy Polishing Co.
809 N Tower Ave.
Centralia WA 98531-4756
1 360 736 2716


Bob' Paint Land, LLC.
1501 NE 99th Street
Vancouver, WA 98665-9015
1 360 573 7133


DSU Portland
5555 N Lagoon Ave.
Portland, OR 97217
1 503 285 7771


Equipment Unlimited Supply
1723 West Valley Hwy Ste. 103
Sumner, WA 98390
1 253 826 0132


Jim's Pacific Garages
2708 N. Commercial
Pasco, WA 99301
1 509 547 7076


Kenworth Northwest, Inc.
20220 International Blvd S.
Seatac, WA  98198-0967
360 533 3356


Kooy's Truck Parts
17066 Beaton Rd. SE #110
Monroe, WA 98272
1 360 794 1220


North Coast Truck Parts & Equipment LLC
34755 Hwy 101 Business
Astoria, OR 97103
1 503 325 3111


Schott Parts & Accessories
8983 Truckman Way
Salem, OR 97303
1 503 463 0500


Tacoma Screw Products, Inc.
2001 Center St.
Tacoma, WA 98409
1 253 680 4256


Valley Pressure Washing
1130 Old Salem Road
Albany, OR 97321
1 541 990 4273


Your Choice Specialties
213 W Carpenter Ave.
Myerstown, PA 17067
1 717 269 2086

Related Products