Flannel Airway Buff 8" Class 6 16ply

Flannel Airway Buff 8" Class 6 16ply

8" diameter 3" center 16ply edge cut Airway style buff. Ultra soft Domet flannel Airway buff for color buffing and final finishing. Extended duty class 6 construction. High density cloth. Buff will need to be raked prior to initial use. Does not include a center reducer plate. Requires the use of a Quickcenter safety flange set or standard 4.5" end flanges in conjunction with a center reducer plate for proper mounting and safe operation.Industrial grade.
$12.00 Each

This item is out of stock and cannot be purchased at this time, please check back again later.

Type:
Flannel Airway Buff
Category:
Airway Wheels
Overview

Ultra soft Domet flannel Airway buff for color buffing and final finishing. Standard duty class 2 construction. High density cloth. Buff will need to be raked prior to initial use. Does not include a center reducer plate. Requires the use of a Quickcenter safety flange set or standard 4.5" end flanges in conjunction with a center reducer plate for proper mounting and safe operation.

Details

Additional Information

Product Type Flannel Airway Buff
SKU B122102
Average Weight 0.65 lbs
Outside Diameter 8"
Inside Diameter 3"
Primary Material Flannel
Cloth Density 42/40
Ply 16
Class 6
Max Face Width 3/4"
Center Hole 3"
Center Reducer Plate Sold Separately
Treatment Untreated
Treatment Properties No
Purpose Color Buffing
Max RPM 3450
Minimum Order 1
Availabilty Stock and Drop Ship Item
Case Quantity 10
Non-Defect Return With RMA - See Policy
Ships From MT, IL
Ships Via UPS, USPS, FedEx, LTL
Warranty Yes
Additional Info No
About

Description: Bias type Airway buff.

Typical Application: For light cut or color buffing. This material, in this type of construction results in a buff that is extremely soft but with good body. The bias construction minimizes fraying and runs cooler than the same material made in loose full disc form. Commonly used with Tripoli for blending as well as coloring compound for high color. A center reducer plate is necessary to center buff on the arbor shaft and end flanges are required for proper mounting and safe operation.

About:
Airway buffs feature a pleated design that allows for cooler operation than full disc untreated buffs, they also provide some oscillation on the face to help prevent rippling and streaking. These are edge cut buffs which means the compound is loaded and all the work is performed on the outer edge only. Airway buffs are similar to loose buffs wherein they will lap considerably under pressure, use extreme caution when using near sharp edges. Cleaning is accomplished through raking or spurring only, do not wash.

Construction:
Class 2 for general purpose and Class 4 for heavy duty. Made of ultra-soft Domet flannel. Note: The class or pack refers to the length of cloth strips wound into the center clinch ring. A higher class number has longer strips which produces more pleats and a firmer, longer wearing buffing wheel.

Sizes:
8" to 24" in diameter depending on job requirements. 16 ply is standard; also available in 12, 14, 18, or 20 ply to accomplish more or less flexibility. Centers are 3", 5", 7" or 9", and should be in a compatible relation with the outside diameter of the buff.

Precautions:
Safe operation requires the use of end flanges. Wear appropriate safety clothing, respiratory, and eye protection during use. Do not exceed maximum specified RPM.

Note:
Industrial grade. Guaranteed for quality and performance.

Media
All related media files will be listed here when available.
Q&A

Product Questions

No Questions
Reviews
0 Review(s)