Bias Sisal Buff: 10 x 3 Red Treated

Bias Sisal Buff 10" x 3" Red Treated

10" diameter by 3" center sewn bias sisal section buff. Firm red dip treated and 1/4" spiral sewn for improved performance on steel and iron. For aggressive cut down operations on steel, stainless steel, and other metals. Recommended for use with gray compounds and emery cake. Does not include a center reducer plate. End flanges are required for proper mounting and safe operation on floor or bench mounted buffing machines. Can also be mounted to portable power tools such as an angle grinder with the use of a Quickcenter safety flange set, when using this mounting method a reducer plate is not needed.

$10.00 Each

This item is out of stock and cannot be purchased at this time, please check back again later.

Bias Type Sewn Sisal Buff
Sisal Wheels

Additional Information

SKU B233304
Average Weight 0.95 lbs.
Product Type Bias Type Sewn Sisal Buff
Primary Material Sisal
Purpose Cut Buffing
Outside Diameter 10"
Inside Diameter 3"
Center Hole 3"
Center Reducer Plate Sold Separately
Ply 8
Stitch Row Spacing 1/4"
Sewing Type Spiral Sewn
Max Face Width 1/2"
Treatment Red Dip Treated
Treatment Properties Dry, Hard
Max RPM 3200
Case Quantity 10
Minimum Order 1
Availabilty Stock and Drop Ship Item
Warranty Yes
Non-Defect Return With RMA - See Policy
Ships Via UPS, USPS, FedEx, LTL
Ships From MT, CA, OH, IL
Additional Info N/A

Description: Bias cut sewn sisal section buff.

About: Sewn bias sisal section buffs are firmer and not as flexible as a open face sisal buffs. These are designed for cut down operations where more flexibility then a full disc sisal buff is required. Used primarily on hard aluminum and steel with limited application on brass and zinc. Not recommended for mush buffing operations. It is generally sewn in the form of a spiral from the center to the edge of the buff. The distance sewn between each row can be 1/4", 3/8" or 1/2". Quarter inch being the most common.

Construction: These buffs are made from bias cut rolls of woven sisal reinforced with the proper thread and spiral sewing depending on the job application. They are cut on the bias which helps reduce fraying. They have a flat compact face appearance which can be varied by altering the ply or density. The choice of spiral sewing and treatment will effect the flexibility and hardness. Available sewing types are Concentric, Straight Spoke, Radial Arc, and others. Can be made from untreated sisal but dip treatments are highly recommended for enhanced performance and extended life.

Typical Application: For buffing or coloring various articles made from metal where increased rigidity is needed over open face sisal buffs.

Sizes: 8" to 22" diameter with standard sections being 8ply. Centers are available in 3", 5", 7", and 9" and should be in compatible relation to the diameter of the buff. Standard 8ply sections are approximately 1/2" thick and can be ganged together on the arbor shaft to achieve the desired overall face width.

Precautions: Proper mounting and safe operation requires the use of end flanges. Wear appropriate safety clothing, respiratory, and eye protection during use. Do not exceed maximum specified RPM.

Note: Industrial grade. Guaranteed for quality and performance.

All related media files will be listed here when available.

Product Questions

No Questions
0 Review(s)